التفاصيل
Thinner for R1950 (dipentine)
Can also be used for cleaning brushes.
Tips for on-glaze painting:
Cadmium reds and yellow: These warm colours needto beapplied more thickly and fired at a slightly lower temperature, to 790C (maximum), with little or no soak. This method is most relevant to P4288 Golden yellow.
Transparent colours:
Any on-glazeor glass paint can bemade transparent by the additionof clearflux.
Products available from Potterycrafts are:
R5925 - Mixing flux for low sol colours
R5926 - Mixing flux for low sol colours,suitable for use with cadmium colours
R5625 - Mixing flux for leadless colours
R5930 - Mixing flux for glass colours (high temperature)
R5948 - Mixing flux for glass colours(medium temperature)
These fluxes can also be used as a protective layer over on-glaze decoration to give extra durability.
Outlines:
Outlines for designs can be traced or drawn freehand using asoft pencil or fine marker pen. For a more permanent result, a pale brown or grey on-glaze colour can be used with a fine brush or pen. This can then be fired togive an outline which will not be lost after the first firing.
Outlines are best done on ware that has been degreased with turpentine and dried.
